General SOLO II Information
Geared for the first time autocrosser.
MEMBERSHIP
============
For regional SOLO events, SCCA membership is a requirement. Weekend memberships are available. Membership option details are available here.
PRE-PREP. (Before leaving home)
=========
Clean your car out thoroughly, this includes glove boxes and pockets.
Your car will need to pass a TECH (Safety) inspection before you can compete. Your battery must be properly secured (not sliding around in its tray), all tires must have a measurable amount of tread(no cord showing) and the car must not be leaking fluids. These are just a few of the items checked but are among those that can be easily remedied before hand, allowing you a day of fun.
If you have a Helmet bring it. Currently the SCCA requires that all helmets have a SNELL SA95 or M95 or better rating. If you don't have a helmet, don't worry, a few loaners are available.
You will be in the Sun/Rain for the full day, come prepared for it. Comfortable clothes and shoes are a must. The course is usually just under a mile long, and it is suggested that you walk it to get familiar. Bring a pair of shoes you can walk a couple of miles in.
Food is usually available near the sites we frequent, however you will probably want to pack a lunch and plenty of water.
- Highly suggested items include;
- Lunch (of your choice)
- Water and other Liquids (No Alcohol! This includes spectators.)
- Sunscreen (of your choice)
- Sunglasses
- Hat (of your choice)
- Umbrella (good for sun as well as rain)
Suggested arrival time at the gate for a first timer is between 6:30 and 7:30Am.
REGISTRATION-
At the gate you should be met by a registration person. If you are not, then proceed to the pit area and from there find the Registration person. Let them know this is your first time out, and they will help you through the Waivers and Registration forms. This is also where you will need to pay for the event. Currently cash and checks are the only valid forms of payment.
After leaving registration you will need to find the pit area and your own pit space. Once in your pit space you need to prepare the car for inspection. Floor mats, hub caps and all loose items must be removed.
SPECIAL CLASSING-
X-CLASS - Reserved for former/current national champions and National trophy winners. This class is indexed (handicapped) base on normal car classification. The X-class runs all at one time.
Novice Class- Reserved for those people who have not completed a full season with the SCCA. This class is indexed (handicapped) based on normal car classification. However the cars in this class run with their normal class. (AS Novice runs at the same time as AS) The results will show a separate section for the Novice class and trophies will be awarded to the top competitors.
TECH. INSPECTION-
Tech inspection is now done while in grid just before your heat runs. That means that your car needs to be in grid one heat before it runs. The first heat drivers need to have their cars in grid as soon as possible in the morning, there will be a grid position list for heat 1 posted when you check in. All other grid lists will be posted during the drivers meeting. Tech inspection will check your car for safety issues, and make sure you have legible numbers on both sides of your car. The numbers and class should be visible from a good distance usually numbers should be a minimum of eight inches tall, and the class letters four to six inches tall.
COURSE WALKS-
Considered by some to be the most important part of the day. The more time you spend walking the course, the better you will drive it when your time comes. For the first timer it can appear to be a "sea of cones" put yourself in your respective car and visualize what it would look like from behind the wheel. The suggested number of course walks varies from "three" to "as many as it takes". When walking the course, watch others and ask lots of questions from those around you. Some suggestions may be from former or current national champions, please listen carefully to the advice you get. If it doesn't make sense ask, "Why". On the other hand, you may be getting advice from a fellow novice, this advice may be the same as what the National Champion would have given, then again it may not. Either way these people are trying to help and are giving "free" advice. Always remember how much you paid for it.
NOVICE WALK THROUGH-
For the first timer, A MUST. Usually meets at 8:00AM at the start line and given by a former National Champion or National Trophy winner. Listen carefully to what these folks have to say. Number one suggestion for the Novice walk through; Try and walk near the front. This makes it easier to hear and see what they are talking about.
DRIVERS MEETING-
Usually scheduled for 8:45, this is required! This is where you will find what RUN/WORK Groups you will be in, and also any other specific information for that particular event. One important person will be pointed out during the drivers meeting this is the "Chief of Workers" keep this person or persons face in mind you will need to contact them for your worker assignment.
RUN/WORK GROUPS-
The event is broken into heats. Usually two to five depending on the number of entrants for the day. You are required to work one heat for each heat you run. The only exception is in the case of you working Registration, Tech. or course design or setup. An example of a run work designation would be. Your class is assigned to Run 1st /Work 3rd This means you will drive in the first heat and Work during the 3rd heat. Worker assignments are usually given during the heat previous to the one you will work. In the case of you working first heat you would locate the Chief of Workers after the drivers meeting.
FUNRUNS-
These are done if there is time after the event. They are done similar to a mini-event - usually two heats, you run one and you work one. The cost is usually a dollar a run.
